James River

AK47 Parts

Sort by Popularity
12 Per Page
1.5mm Center Support and Rivet
1.5mm Center Support and Rivet
$7.00
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...
Out of stock
AK47 7.62 Flat With Trunnion Holes
AK47 7.62 Flat With Trunnion Holes
$46.95
With Y & I Embossing, 1mm
The front and rear trunnion holes on these flats are pre-punched to help with the installation of the trunnions.  In some cases the front trunnion rivet...
Out of stock
Triangle Sidefolder Reinforcement Plate
Triangle Sidefolder Reinforcement Plate
$14.95
These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates. This plate welds to the rear lower section of...
In stock
+ −
Buy now with 1-click
Standard AK47 Fixed Stock 7.62 Flat
Standard AK47 Fixed Stock 7.62 Flat
$44.95
With Y & I Embossing, 1mm
Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver.  Without the trunnion holes you can put any rear...
Out of stock
AK74 5.45x39 Fixed Stock Receiver Flat
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
In stock
+ −
Buy now with 1-click
7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed
7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed
$59.95
With Y & I Embossing, 1mm
T h is flat is for using a Bulgarian style rear sidefolding stock/trunnion to make the so called "Khyber Pass" AK's in 7.62x39. Receiver flat...
Out of stock
AK-Builder Lower Bolt Guide Yugo Rails
AK-Builder Lower Bolt Guide Yugo Rails
$10.95
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In stock
+ −
Buy now with 1-click
Romanian MD63/M65 Underfolder Flat
Romanian MD63/M65 Underfolder Flat
$59.95
With Y & I Embossing, 1mm
    These are made to work with the Romanian underfolder stocks and will not work with the Polish or Yugo sets.  There is no need to buy...
In stock
+ −
Buy now with 1-click
Hungarian AMMS AK63 Underfolder Flat
Hungarian AMMS AK63 Underfolder Flat
$59.95
With Y & I Embossing, 1mm
THESE DO NOT HAVE ALIGNMENT HOLES IN THEM ANYMORE The AMMS trunnions I have seen are machined unlike the Polish which are stamped and welded...
Out of stock
Polish Underfolder Flat
Polish Underfolder Flat
$59.95
With Y & I Embossing, 1mm
The Polish Underfolder is the most popular underfolder parts kit and this was the first specialty flat that I had perfected by modifying existing flats in...
In stock
+ −
Buy now with 1-click
Underfolder Reinforcement Plate
Underfolder Reinforcement Plate
$14.95
This is a new design that matches the original plates.  Orders shipped after 9/5/2015 will have the newer design. These are not needed on the Yugo's...
Out of stock
Polish Tantal Flat 5.45 x 39
Polish Tantal Flat 5.45 x 39
$59.95
With Y & I Embossing, 1mm
This flat is specifially made for the Polish Tantal to work with the left side selector and right side safety.  The hole for the selector/safety is a...
In stock
+ −
Buy now with 1-click
 Prev
1 2 3
Next