CODE: C8-51

1.5mm Center Support and Rivet

$7.00

These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...

CODE: B2-61Y

AK47 7.62 Flat With Trunnion Holes

$46.95

With Y & I Embossing, 1mm

The front and rear trunnion holes on these flats are pre-punched to help with the installation of the trunnions. In some cases the front trunnion rivet...

CODE: B6-41

Triangle Sidefolder Reinforcement Plate

$14.95

These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates. This plate welds to the rear lower section of...

Availability: In stock

CODE: B1-71Y

Standard AK47 Fixed Stock 7.62 Flat

$44.95

With Y & I Embossing, 1mm

Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver. Without the trunnion holes you can put any rear...

CODE: B2-41Y

AK74 5.45x39 Fixed Stock Receiver Flat

$45.95

With Y & I Embossing, 1mm

This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags. There are no front or rear trunnion holes....

Availability: In stock

CODE: B2-31Y

7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed

$59.95

With Y & I Embossing, 1mm

T h is flat is for using a Bulgarian style rear sidefolding stock/trunnion to make the so called "Khyber Pass" AK's in 7.62x39. Receiver flat...

CODE: F7-11

AK-Builder Lower Bolt Guide Yugo Rails

$10.95

Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...

Availability: In stock

CODE: B2-21Y

Romanian MD63/M65 Underfolder Flat

$59.95

With Y & I Embossing, 1mm

These are made to work with the Romanian underfolder stocks and will not work with the Polish or Yugo sets. There is no need to buy...

Availability: In stock

CODE: B1-51Y

Hungarian AMMS AK63 Underfolder Flat

$59.95

With Y & I Embossing, 1mm

THESE DO NOT HAVE ALIGNMENT HOLES IN THEM ANYMORE The AMMS trunnions I have seen are machined unlike the Polish which are stamped and welded...

CODE: B2-51Y

Polish Underfolder Flat

$59.95

With Y & I Embossing, 1mm

The Polish Underfolder is the most popular underfolder parts kit and this was the first specialty flat that I had perfected by modifying existing flats in...

Availability: In stock

CODE: A2-41

Underfolder Reinforcement Plate

$14.95

This is a new design that matches the original plates. Orders shipped after 9/5/2015 will have the newer design. These are not needed on the Yugo's...

CODE: B1-11Y

Polish Tantal Flat 5.45 x 39

$59.95

With Y & I Embossing, 1mm

This flat is specifially made for the Polish Tantal to work with the left side selector and right side safety. The hole for the selector/safety is a...

Availability: In stock

CODE: B4-21

Romanian 7.62 RPK Receiver Flat 1.5mm

$58.50

1.5mm

These flats are for the bulged trunnion RPK 47 7.62 parts kits. The flats and rails are made from 4130 and are in the soft annealed condition and need...

Availability: In stock

Save 18%

CODE: A2-43

Saiga 12 Russian Extended Reinforcement Plate

$21.95 $17.95

This is for the longer Russian pistol grip to fit on the Saiga 12. The Hogue pistol grip is longer than standard and uses this same plate. Pistol grip...

Availability: In stock

CODE: B3-11

Yugo M70 1.5mm Yugo Fixed Stock Flat

$57.50

1.5mm

Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from...

Availability: In stock

CODE: B5-31

MAK90 Receiver Flat

$59.95

1.27mm

This is our MAK90 flat without trunnion holes with the top rails machined. Due to the dimensional differences between these and the other flats you will...

CODE: B1-31Y

M92 Underfolder Trunnion Flat

$59.95

With Y & I Embossing, 1mm

This flat will work with the M92 or M70 that has the flat sided front trunnion . These will NOT WORK with the bulged RPK style trunnions. There...

CODE: B1-61Y

Hungarian AMD 65 Receiver Flat

$59.95

With Y & I Embossing, 1mm

These are the correct flats for the AMD-65 parts kits with the sidefolding stock. These do not need the sidefolder reinforcement plate. The...

Availability: In stock

CODE: B5-41

Mak 90 Underfolder Flat

$59.95

1.27mm

This is our MAK90 underfolder flat with top rails machined and mag well dimples. These come with lower bolt guide rails. Due to the dimensional differences...

CODE: B5-21

MAK90 Receiver Flat with Trunnion Holes

$54.95

1.27mm

This is our MAK90 flat with trunnion holes and the top rails machined. Due to the dimensional differences between these and the other flats you will...

Khyber Pass AK47 7.62x39 Side Folder ROM

$1,349.00

One of only two left of our Khyber Pass Romanian side-folders!

Availability: In stock

CODE: B1-41

Mak 90 Underfolder Flat With Magwell Dimples

$58.95

THIS REQUIRES OUR MODIFIED MAK90 PUNCH TO BEND CORRECTLY. IF YOU USE OUR OLD PUNCH IT WILL RUIN THE FLAT! WE HAD TO MODIFY THE MAK90 PUNCH TO ACCOMADATE...

CODE: B3-41

Yugo M85/M95 1.5mm Yugo Underfolder Flat

$57.50

1.5mm

This is the 1.5mm 4130 flat and rails for the M85 kits that are out. It's basically just our standard M70 underfolder flat without the pin holes cut...

Availability: In stock

CODE: B3-31

Yugo M70 1.5mm Yugo Underfolder Flat

$57.50

1.5mm

Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...

Availability: In stock