Search options Open Hide
  orReset
Sort by Price: Low to High
24 Per Page
Metal Finishes
Contact us for a price
In stock
Already have a parts kit? Build it yourself, or have us do it for you!
Already have a parts kit? Build it yourself, or have us do it for you!
Contact us for a price
If you already have a BM-59 kit and wish to build it up yourself, we can help with that! We do not sell stripped receivers (too many Bubbas out there),...
In stock
1.5mm Center Support and Rivet
C8-51
1.5mm Center Support and Rivet
$7.00
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...
AK-Builder Lower Bolt Guide Yugo Rails
F7-11
AK-Builder Lower Bolt Guide Yugo Rails
$10.95
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In stock
Underfolder Reinforcement Plate
A2-41
Underfolder Reinforcement Plate
$14.95
This is a new design that matches the original plates.  Orders shipped after 9/5/2015 will have the newer design. These are not needed on the Yugo's...
Triangle Sidefolder Reinforcement Plate
B6-41
Triangle Sidefolder Reinforcement Plate
$14.95
These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates. This plate welds to the rear lower section of...
In stock
Save 18%
Saiga 12 Russian Extended Reinforcement Plate
A2-43
Saiga 12 Russian Extended Reinforcement Plate
$21.95 $17.95
This is for the longer Russian pistol grip to fit on the Saiga 12.  The Hogue pistol grip is longer than standard and uses this same plate. Pistol grip...
In stock
New U.S. Made Garand Gas Plug
New U.S. Made Garand Gas Plug
$19.00
These are U.S. manufactured from 416 heat treated stainless steel to the original U.S. Government blueprints.   They are an outstanding addition...
In stock
Reproduction Mauser Sling
Reproduction Mauser Sling
$19.95
Quality reproduction leather K98 sling.
In stock
15rd. M1 Carbine Magazine
15rd. M1 Carbine Magazine
$19.95
New Korean manufactured 15rd. M1 carbine magazine. *Ships only where legal, please know your state and local laws before ordering magazines.
In stock
30rd. M1 Carbine Magazine
30rd. M1 Carbine Magazine
$21.95
New Korean production 30 round M1 carbine magazine. *Ships only where legal, please know your state and local laws before ordering magazines.
In stock
BM-59 Buttstock tool - NEW
BM-59 Buttstock tool - NEW
$25.00
Originally made for the M1 Garand, these tools were re-packaged by Beretta for the BM59 rifles. New, unsealed.
In stock
Reproduction 1903 Springfield/M1 Garand Bayonets
Reproduction 1903 Springfield/M1 Garand Bayonets
$39.95
10" or 16" repro bayonets with scabbards
In stock
Standard AK47 Fixed Stock 7.62 Flat
B1-71Y
Standard AK47 Fixed Stock 7.62 Flat
$44.95
With Y & I Embossing, 1mm
Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver.  Without the trunnion holes you can put any rear...
AK74 5.45x39 Fixed Stock Receiver Flat
B2-41Y
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
In stock
AK47 7.62 Flat With Trunnion Holes
B2-61Y
AK47 7.62 Flat With Trunnion Holes
$46.95
With Y & I Embossing, 1mm
The front and rear trunnion holes on these flats are pre-punched to help with the installation of the trunnions.  In some cases the front trunnion rivet...
BM-59 Magazines - LIMITED SUPPLY, limit of five per customer
BM-59 Magazines - LIMITED SUPPLY, limit of five per customer
$49.95
Used, but in excellent shape. MAY have some very slight surface rust that can be removed with a nylon cleaning brush and oil. THERE IS A LIMIT OF FIVE...
MAK90 Receiver Flat with Trunnion Holes
B5-21
MAK90 Receiver Flat with Trunnion Holes
$54.95
1.27mm
This is our MAK90 flat with trunnion holes and the top rails machined.  Due to the dimensional differences between these and the other flats you will...
Yugo M70 1.5mm Yugo Fixed Stock Flat
B3-11
Yugo M70 1.5mm Yugo Fixed Stock Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat.  The material these are made from...
In stock
Yugo M70 1.5mm Yugo Underfolder Flat
B3-31
Yugo M70 1.5mm Yugo Underfolder Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
In stock
Yugo M72 1.5mm RPK Receiver Flat
B3-21
Yugo M72 1.5mm RPK Receiver Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
In stock
Yugo M85/M95 1.5mm Yugo Underfolder Flat
B3-41
Yugo M85/M95 1.5mm Yugo Underfolder Flat
$57.50
1.5mm
This is the 1.5mm 4130 flat and rails for the M85 kits that are out.  It's basically just our standard M70 underfolder flat without the pin holes cut...
In stock
M70/M72 Yugo 1.5mm NO-HOLES Flat
B5-91
M70/M72 Yugo 1.5mm NO-HOLES Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
Romanian 7.62 RPK Receiver Flat 1.5mm
B4-21
Romanian 7.62 RPK Receiver Flat 1.5mm
$58.50
1.5mm
These flats are for the bulged trunnion RPK 47 7.62 parts kits.  The flats and rails are made from 4130 and are in the soft annealed condition and need...
In stock
 Prev
1 2 3
Next 
    Cancel