Search options Open Hide
  orReset
Sort by Price: Low to High
96 Per Page
Metal Finishes
Contact us for a price
In stock
Already have a parts kit? Build it yourself, or have us do it for you!
Already have a parts kit? Build it yourself, or have us do it for you!
Contact us for a price
If you already have a BM-59 kit and wish to build it up yourself, we can help with that! We do not sell stripped receivers (too many Bubbas out there),...
In stock
1.5mm Center Support and Rivet
C8-51
1.5mm Center Support and Rivet
$7.00
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...
AK-Builder Lower Bolt Guide Yugo Rails
F7-11
AK-Builder Lower Bolt Guide Yugo Rails
$10.95
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In stock
Underfolder Reinforcement Plate
A2-41
Underfolder Reinforcement Plate
$14.95
This is a new design that matches the original plates.  Orders shipped after 9/5/2015 will have the newer design. These are not needed on the Yugo's...
Triangle Sidefolder Reinforcement Plate
B6-41
Triangle Sidefolder Reinforcement Plate
$14.95
These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates. This plate welds to the rear lower section of...
In stock
Save 18%
Saiga 12 Russian Extended Reinforcement Plate
A2-43
Saiga 12 Russian Extended Reinforcement Plate
$21.95 $17.95
This is for the longer Russian pistol grip to fit on the Saiga 12.  The Hogue pistol grip is longer than standard and uses this same plate. Pistol grip...
In stock
New U.S. Made Garand Gas Plug
New U.S. Made Garand Gas Plug
$19.00
These are U.S. manufactured from 416 heat treated stainless steel to the original U.S. Government blueprints.   They are an outstanding addition...
In stock
Reproduction Mauser Sling
Reproduction Mauser Sling
$19.95
Quality reproduction leather K98 sling.
In stock
15rd. M1 Carbine Magazine
15rd. M1 Carbine Magazine
$19.95
New Korean manufactured 15rd. M1 carbine magazine. *Ships only where legal, please know your state and local laws before ordering magazines.
In stock
30rd. M1 Carbine Magazine
30rd. M1 Carbine Magazine
$21.95
New Korean production 30 round M1 carbine magazine. *Ships only where legal, please know your state and local laws before ordering magazines.
In stock
BM-59 Buttstock tool - NEW
BM-59 Buttstock tool - NEW
$25.00
Originally made for the M1 Garand, these tools were re-packaged by Beretta for the BM59 rifles. New, unsealed.
In stock
Reproduction 1903 Springfield/M1 Garand Bayonets
Reproduction 1903 Springfield/M1 Garand Bayonets
$39.95
10" or 16" repro bayonets with scabbards
In stock
Standard AK47 Fixed Stock 7.62 Flat
B1-71Y
Standard AK47 Fixed Stock 7.62 Flat
$44.95
With Y & I Embossing, 1mm
Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver.  Without the trunnion holes you can put any rear...
AK74 5.45x39 Fixed Stock Receiver Flat
B2-41Y
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
In stock
AK47 7.62 Flat With Trunnion Holes
B2-61Y
AK47 7.62 Flat With Trunnion Holes
$46.95
With Y & I Embossing, 1mm
The front and rear trunnion holes on these flats are pre-punched to help with the installation of the trunnions.  In some cases the front trunnion rivet...
BM-59 Magazines - LIMITED SUPPLY, limit of five per customer
BM-59 Magazines - LIMITED SUPPLY, limit of five per customer
$49.95
Used, but in excellent shape. MAY have some very slight surface rust that can be removed with a nylon cleaning brush and oil. THERE IS A LIMIT OF FIVE...
MAK90 Receiver Flat with Trunnion Holes
B5-21
MAK90 Receiver Flat with Trunnion Holes
$54.95
1.27mm
This is our MAK90 flat with trunnion holes and the top rails machined.  Due to the dimensional differences between these and the other flats you will...
Yugo M70 1.5mm Yugo Fixed Stock Flat
B3-11
Yugo M70 1.5mm Yugo Fixed Stock Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat.  The material these are made from...
In stock
Yugo M70 1.5mm Yugo Underfolder Flat
B3-31
Yugo M70 1.5mm Yugo Underfolder Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
In stock
Yugo M72 1.5mm RPK Receiver Flat
B3-21
Yugo M72 1.5mm RPK Receiver Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
In stock
Yugo M85/M95 1.5mm Yugo Underfolder Flat
B3-41
Yugo M85/M95 1.5mm Yugo Underfolder Flat
$57.50
1.5mm
This is the 1.5mm 4130 flat and rails for the M85 kits that are out.  It's basically just our standard M70 underfolder flat without the pin holes cut...
In stock
M70/M72 Yugo 1.5mm NO-HOLES Flat
B5-91
M70/M72 Yugo 1.5mm NO-HOLES Flat
$57.50
1.5mm
Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063...
Romanian 7.62 RPK Receiver Flat 1.5mm
B4-21
Romanian 7.62 RPK Receiver Flat 1.5mm
$58.50
1.5mm
These flats are for the bulged trunnion RPK 47 7.62 parts kits.  The flats and rails are made from 4130 and are in the soft annealed condition and need...
In stock
Mak 90 Underfolder Flat With Magwell Dimples
B1-41
Mak 90 Underfolder Flat With Magwell Dimples
$58.95
THIS REQUIRES OUR MODIFIED MAK90 PUNCH TO BEND CORRECTLY. IF YOU USE OUR OLD PUNCH IT WILL RUIN THE FLAT! WE HAD TO MODIFY THE MAK90 PUNCH TO ACCOMADATE...
Polish Underfolder Flat
B2-51Y
Polish Underfolder Flat
$59.95
With Y & I Embossing, 1mm
The Polish Underfolder is the most popular underfolder parts kit and this was the first specialty flat that I had perfected by modifying existing flats in...
In stock
M92 Underfolder Trunnion Flat
B1-31Y
M92 Underfolder Trunnion Flat
$59.95
With Y & I Embossing, 1mm
This flat will work with the M92 or M70 that has the flat sided front trunnion . These will NOT WORK with the bulged RPK style trunnions.   There...
Hungarian AMD 65 Receiver Flat
B1-61Y
Hungarian AMD 65 Receiver Flat
$59.95
With Y & I Embossing, 1mm
These are the correct flats for the AMD-65 parts kits with the sidefolding stock.  These do not need the sidefolder reinforcement plate.  The...
In stock
Hungarian AMMS AK63 Underfolder Flat
B1-51Y
Hungarian AMMS AK63 Underfolder Flat
$59.95
With Y & I Embossing, 1mm
THESE DO NOT HAVE ALIGNMENT HOLES IN THEM ANYMORE The AMMS trunnions I have seen are machined unlike the Polish which are stamped and welded...
Polish Tantal Flat 5.45 x 39
B1-11Y
Polish Tantal Flat 5.45 x 39
$59.95
With Y & I Embossing, 1mm
This flat is specifially made for the Polish Tantal to work with the left side selector and right side safety.  The hole for the selector/safety is a...
In stock
Romanian MD63/M65 Underfolder Flat
B2-21Y
Romanian MD63/M65 Underfolder Flat
$59.95
With Y & I Embossing, 1mm
    These are made to work with the Romanian underfolder stocks and will not work with the Polish or Yugo sets.  There is no need to buy...
In stock
7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed
B2-31Y
7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed
$59.95
With Y & I Embossing, 1mm
T h is flat is for using a Bulgarian style rear sidefolding stock/trunnion to make the so called "Khyber Pass" AK's in 7.62x39. Receiver flat...
MAK90 Receiver Flat
B5-31
MAK90 Receiver Flat
$59.95
1.27mm
This is our MAK90 flat without trunnion holes with the top rails machined.  Due to the dimensional differences between these and the other flats you will...
Mak 90 Underfolder Flat
B5-41
Mak 90 Underfolder Flat
$59.95
1.27mm
This is our MAK90 underfolder flat with top rails machined and mag well dimples. These come with lower bolt guide rails. Due to the dimensional differences...
Original BM59 Bayonetes
Original BM59 Bayonetes
$109.95
Original Italian BM59 bayonets with sheaths, in VG+ condition.
1911 Restoration Service
1911 Restoration Service
$150.00
First, we perform a Limited Technical Inspection, followed by a complete detail strip and refinishing of the components in the correct zinc parkerizing,...
In stock
BM59 Scope Mounts by Sadlak
BM59 Scope Mounts by Sadlak
$259.00
Sadlak manufactured BM59 scope mounts - all steel. Top of the line mounts, by the company that has the US Military contract for the M14 scope mounts. With...
K98 German Mauser Restoration Service
K98 German Mauser Restoration Service
$449.00
Basic Restoration Includes: - Disassemble and refinish all metal (hot salt blue) - Gauge barrel chamber and muzzle, and check headspace - Correctly...
In stock
M1 Carbine Restoration - USGI ONLY
M1 Carbine Restoration - USGI ONLY
$449.00
Basic Restoration Includes: - Detail strip and bead blast - Gauge barrel chamber and muzzle, and check headspace - Complete reparkerizing of all...
In stock
M1 Garand Restoration
M1 Garand Restoration
$495.00
Basic restoration includes: - Complete disassembly and refinishing of all metal parts either zinc phosphate or manganese phosphate - Check and gauge...
In stock
JRA Gallant and SAR barrelled actions
JRA Gallant and SAR barrelled actions
$595.00
Standard JRA fully machined billet Gallant marked receivers, barrelled in either the standard AKM version, or the short barreled SAR version. We only have...
In stock
1903A3 to A4 Scoped Sniper Conversion Service
1903A3 to A4 Scoped Sniper Conversion Service
$800.00
Basic Restoration Includes: -Drill and tap receiver -Bend bolt handle -Refinish all metal in manganese phosphate -Provide a new production...
In stock
Upgrade your JRA Gen 1 receiver to the new forged billet Gen 2 receiver
Upgrade your JRA Gen 1 receiver to the new forged billet Gen 2 receiver
$895.00
We take your existing JRA Gen-1 BM-59, and rebuild it on our forged billet receiver. Price includes test-firing and return shipping.
ARISAKA TYPE 99 - MID WAR
ARISAKA TYPE 99 - MID WAR
$975.00
JRA restored, with chrysanthemum, cleaning rod, and aircraft sights.
In stock
Khyber Pass AK47 7.62x39 Side Folder ROM
Khyber Pass AK47 7.62x39 Side Folder ROM
$1,349.00
One of only two left of our Khyber Pass Romanian side-folders!
In stock
1943 Remington 1903A3 Straight Stock
1943 Remington 1903A3 Straight Stock
$1,349.00
Beautiful 1903A3 with straight stock, JRA refurbished. Because the barrel was shot out during the war, we have replaced it with a NEW, old stock 5/43 dated...
In stock
1917 Eddystone P17 #1
1917 Eddystone P17 #1
$1,349.00
Unbelievable condition, JRA refurbished Eddystone with original stock and barrel (excellent bore, ME=2). This one dated 9/17, meaning it was one of the...
In stock
1943 Remington 1903A3 with Scant Stock
1943 Remington 1903A3 with Scant Stock
$1,349.00
Beautiful 1903A3 with transitional scant stock, JRA refurbished. Because the barrel was shot out during the war, we have replaced it with a NEW, old...
Mauser 98k from 1901 - a true two-war rifle, with matching numbers!
Mauser 98k from 1901 - a true two-war rifle, with matching numbers!
$1,395.00
What an interesting piece of history here, and a rifle that has truly "seen the elephant"... many times... This rifle began its life in 1901 as a Spandau...
In stock
Mauser 98K from 1916 - TWO WAR RIFLE
Mauser 98K from 1916 - TWO WAR RIFLE
$1,395.00
This JRA restored Spandau 98k is a two-war rifle, having first served in the Great War as a Gewehr 98, and then subsequently converted to 98b configuration...
In stock
1943 Walther P38 9mm pistol - all matching numbers!
1943 Walther P38 9mm pistol - all matching numbers!
$1,549.00
This AC code marked (Walther) was designed in 1938 to replace the venerable P08 Luger, which was complicated and expensive to manufacture, especially...
In stock
Gallant SAR 5.56x45
Gallant SAR 5.56x45
$1,695.00
The SAR (Short Automatic Rifle) is the most desirable of the Galil variants, and this one our last one for the foreseeable future, as parts kits for ...
In stock
Remington Rand 1911 - 1943 Manufacture Date
Remington Rand 1911 - 1943 Manufacture Date
$1,795.00
A two to three war sidearm, this Remington is in excellent functional condition.
In stock
BM59 - Turn-in Condition
BM59 - Turn-in Condition
$1,795.00
These rifles appear almost exactly as they did when they were turned in by Italian Army troops over 40 years ago. What is new are the new James River...
In stock
BM62 Carbine - exclusively through JRA!
BM62 Carbine - exclusively through JRA!
$1,795.00
Without a BM62 muzzle break and bipod, the carbine version is closer to a Scout Rifle, but with a few extra pounds to mitigate recoil. Add $225 for an...
In stock
JRA Restored 1943 Remington Rand 1911A1
JRA Restored 1943 Remington Rand 1911A1
$1,895.00
This 1911A1 saw use through WW II, Korea, and Vietnam, and remained as standard issue through the 1980s. All firearm purchases must be made by...
In stock
JRA restored Colt 1911A1 from 1945
JRA restored Colt 1911A1 from 1945
$1,995.00
The iconic Colt .45! WW II Colt manufactured 1911A1 pistols two-tone slides, that were a result of a lead annealing process, to prevent the slide from...
In stock
BM-62 - Limited Production run exclusively through James River Armory!
BM-62 - Limited Production run exclusively through James River Armory!
$1,995.00
Beretta developed a carbine version of the BM59 in 1962 as an export model, designating it the BM-62. A few semi-auto rifles were made for the civilian...
In stock
BM59s with Stripper Clip Guides - only through JRA!
BM59s with Stripper Clip Guides - only through JRA!
$1,995.00
As issued to the Italian Army, most BM59s were equipped with a clip guide to facilitate emergency loading via stripper clips. Unlike the US M14, the M1...
In stock
BM-59 ITAL Model
BM-59 ITAL Model
$2,195.00
The classic ITAL model was the standard issue for the Italian military. In addition to the box magazine, it had an integral folding bipod and combination...
In stock
BM-59 "E" Model
BM-59 "E" Model
$2,195.00
The BM-59E model were contract M1 Garand conversions done by Beretta for other foreign militaries. While the ITAL version clearly represented a cut-down...
BM59 Premium Grade #1 - a JRA Exclusive!
BM59 Premium Grade #1 - a JRA Exclusive!
$2,395.00
Every now and then, we come across a stock for a military rifle that we are restoring that is spectacular. This is one of those times... We only sell...
In stock
BM-59 ALPINI Model
BM-59 ALPINI Model
$2,795.00
The ALPINI (mountain troop) model, which had a side-folding stock and pistol grip, with the same non-removable tri-comp flash hider as the ITAL. Please...
In stock
1917 German DWM Artillery Luger
1917 German DWM Artillery Luger
$2,995.00
Manufactured by DWM - Deutsche Waffen und Munitionsfabriken - these rare, 8" Artillery Lugers with 800m sights, were only produced between 1913-1918....
In stock
BM-59 PARA Model
BM-59 PARA Model
$2,995.00
The PARATROOPER model, which differs from the ALPINI by the existence of a removable grenade launcher/tri-compensator, which the ALPINI does NOT have....
In stock
    Cancel